Alchem Inc Norse Hilts
314 East 195th St.
Euclid, Ohio 44119
alchem@en.com

Fencing Home

Long Blades

Dagger Blades

Hilts & Dagger Blades

Pikes

Extra Pommels & Blunts

Ordering Information

Order Form


Click on image to see greater detail
Click on image to see greater detail
The above photos depict our Norse Hilt with a 4 3/8 inch long hard wood grip and an overall hilt length of 6 1/4 inches. These hilts can be mounted on several blade types depending on intended use. The example on the left has a flexible wide flat tang blade with a length of 34 inches and a straight tip to take a rubber blunt. These can be made in a variety of stiffnesses for use in either standard SCA rapier fencing or cut and thrust. The example on the right is mounted on a 29 inch stiff long seax blade with a 20mm diameter rounded tip as required for HEMA and SCA armored rebated steel blade combat. When ordering please specify the blade type, flexible or stiff, and any stiffness and tip requirements. Since the blades are all custom made we can provide whatever is required.



Prices are as follows.:
  • Hilt with Alchem flexible wide flat tang blade 32" to 40" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US
  • Hilt with Alchem flexible light broadsword blade 32" to 36" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US
  • Hilt with Alchem stiff 20mm round tip flat tang blade 29" to 33" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US


If you are ordering a hilt and blade to be shipped to an address outside the US, send us an email at alchem@en.com with the hilt type, blade length, and destination, and we'll calculate the shipping cost.
When ordering, be sure to specify (PayPal provides for comments to seller)
  • hilt metal finish ('B'lack or 'G'ray),
  • grip stain (unstained, brown, black, or other)
  • blade length (see available options)
  • Please note: If not specified, the defaults are gray metal, grip in brown stain, and middle of range blade length.


Click on image to see greater detail
The above photos depict our Type "A" Norse Hilt with a 4 1/2 inch long hard wood grip and an overall hilt length of 6 3/4 inches. These hilts can be mounted on several blade types depending on intended use. This has a flexible wide flat tang blade with a length of 35 inches and a straight tip to take a rubber blunt. These can be made in a variety of stiffnesses for use in either standard SCA rapier fencing or cut and thrust, or they can be mountrd on stiff blade with a 20mm diameter rounded tip as required for HEMA and SCA armored rebated steel blade combat. As with all of our products the grip and blade lengths can vary according to the customer's needs. When ordering please specify the blade type, flexible or stiff, and any stiffness and tip requirements. Since the blades are all custom made we can provide whatever is required.



Prices are as follows.:
  • Hilt Type A with Alchem flexible wide flat tang blade 32" to 40" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US
  • Hilt Type A with Alchem flexible light broadsword blade 32" to 36" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US
  • Hilt Type A with Alchem stiff 20mm round tip flat tang blade 29" to 33" (any finish) $250 US ($240 foreign) 2.5pounds = 1.09kgs
    To US


If you are ordering a hilt and blade to be shipped to an address outside the US, send us an email at alchem@en.com with the hilt type, blade length, and destination, and we'll calculate the shipping cost.
When ordering, be sure to specify (PayPal provides for comments to seller)
  • hilt metal finish ('B'lack or 'G'ray),
  • grip stain (unstained, brown, black, or other)
  • blade length (see available options)
  • Please note: If not specified, the defaults are gray metal, grip in brown stain, and middle of range blade length.